공기 압축기 용 유카 127cfm Desiccant 필터

$208.821-19 Piece/Pieces

$192.68≥20Piece/Pieces

지불 유형:	T/T,L/C
인 코텀:	FOB,CFR,CIF,EXW
수송:	Ocean,Land,Air,Express,Others
포트:	Shenzhen,Guangzhou ,Shanghai

지금 연락

제품 설명

제품 속성

포장 및 배송

제품 설명

제품 속성

모형: YF060

상표: 유카

Medium Material: Fiberglass

HS 코드: 8421399090

Trademark: Yuka

Origin: China

Clapboard: Without Clapboard

Filter Number: 1

Type: Cartridge Filter

Material: Aluminum Alloy

Filtration Performance: From 5 μm To 0.01μm

Operate Temperature: 1.5~80ºc

Resistance Corrosion: Inside And Outside

Transport Package: Brown Inner Box & Cardboard

Filtration Grade: Pre Filter

Housing Serve Lige: 15 Years

Maxi. Operate Pressure: 1.0mpa

Parts: Dp Indicator, Auto Drain, Sight Glass

Efficiency: F9

PF/AO/AA/AX Element Serve Life: 4000-6000 Hours

Filtration Accuracy: 0.01 Micron, Residual Content Of Oil Mist 0.003

Specification: Dimension: 138x 111x 403mm

포장 및 배송

판매 단위	:	Piece/Pieces
포장 종류	:	내부 상자 및 카톤
사진 예	:

The file is encrypted. Please fill in the following information to continue accessing it

제품 설명

Compresses air solution in scientifically will be highly improved the efficiency for ownership, saving energy and saving money during the whole process. How to choose a line air filter will be an important question for everyone before they make decision. Below is some tips for you to select compressed air filter for your precess.

①Assess the requirements of your application. Different industry require different solution.	②What type of filtration is needed? Coalecent filter material removes solid and liquied contaminants from gas streams. Particulate filter media removes solid from gas streams. Absorber media removes hydrocarbon vapors from gas streams.	③Any specific micron of filtration performance you required?
④What are the working conditions of your application? Mainly criteria of consider : Flow, working pressure, temperature,pressure loss,material of structure (stainless steel, aluminum alloy, mild steel, carbon steel)	⑤Filter flow rate from how much SCFM? Pressure drop should be less than **bar? For saving the cost and protect environment.

Feature & Advantage

①Filtration performance up to 99.99% under the rate working conditions

② Aluminum Alloy Air Filter case, with 15 years serve life, lowest ownership overall cost

③7 Layers for filter element, fiber glass material, PF/AO/AA/AX with 4000-6000 hours spanlife

④Effectively filter solid particles up to 0.01 microns, suspended oil up to 0.003mg/m³

⑤Die-casting technology filter connection up to RC 4", capacity from 1.0m³/min to 48m³/min

⑥Both inside and outside housing with anti-corrosion treatment, prevent second pollution from itself

⑦Low Pressure drop for ownership
⑧ Replace filter element without third-party or any tools

7 Grade s Filter Element in Detail

PF: As a primary filter, particles whose diameter more than 5μm can be remove,the maxi. residual oil content is negligible

AO: High efficiency general protection, dust particles, water mist & oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³ (21 ºC) ,1ppm(w).

AA: High effiency oil remove filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21 ºC ),0.01ppm(w)

AX: Ultra-efficient filtration, dust particles, water mist&oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21 ºC ),0.001ppm(w)

ACS: Dust particles whose diameter more than 0.01μm, oil vapor &odor can be removed, the maxi. resident content of oil vapor does not exceed 0.003mg/m³(21 ºC ) , 0.003ppm ( w )

AR: Dust particles whose diameter more than 1μm can be removed
AAR: Dust particles whose diameter more than 0.01μm can be removed

기술 사양

The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g). 다른 작업 압력에 적용하려면 보정 계수를 참조하십시오.

Model	Pipe size	Flow rates			Dimension (mm)
Model	Pipe size	L/S	m³/min	scfm	W(Width)	D(Depth)	H(Height)	A	B	C(clearance for housing)
YF010	RC1/2"	16.7	1.0	35.3	96	79	261	29	198	118
YF020	RC3/4"	25.0	1.5	53.0	96	79	261	29	198	118
YF030	RC3/4"	30.0	1.8	63.6	96	79	295	29	233	153
YF040	RC1"	33.3	2.0	71.0	96	79	295	29	233	153
YF060	RC1"	60.0	3.6	127.0	138	111	403	37	296	208
YF070	RC1"	83.3	5.0	177.0	138	111	503	37	396	303
YF080	RC1-1/2"	125.0	7.5	265.0	138	111	503	37	396	303
YF090	RC2"	166.7	10.0	353.1	174	142	736	58	607	469
YF100	RC2-1/2"	216.7	13.0	459.0	174	142	736	58	607	469
YF110	RC2"	283.3	17.0	600.0	174	142	1016	58	887	794
YF120	RC2-1/2"	316.7	19.0	671.0	174	142	1016	58	887	794
YF130	RC3"	416.7	25.0	883.0	220	184	793	74	649	514
YF140	RC4"	466.7	28.0	989.0	220	184	793	74	649	514
YF150	RC3"	683.3	41.0	1448.0	220	184	1050	74	906	764
YF160	RC4"	800.0	48.0	1695.0	220	184	1050	74	906	764
Technical requirements	Maximum operating pressure: 10 barg Operating temperature: 1.5°C~80°C.

Pressure	Barg	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
Pressure	Psig	15	29	44	59	73	87	100	116	131	145	160	174	189	203	219	232
Correction factor		0.38	0.53	0.65	0.76	0.85	0.93	1.00	1.07	1.13	1.19	1.23	1.31	1.36	1.41	1.46	1.51